1. Daily cleaning

- After the end of work every day, dust, debris and residual sponge debris on the surface of the sponge machine should be cleaned, which can be cleaned with a clean rag or compressed air.

- Regularly clean the dust and debris inside the equipment, especially the transmission parts, tool parts, etc., to ensure the normal operation of the equipment.

2. Lubrication maintenance

- According to the operation instructions of the equipment, regularly lubricate the various lubrication points of the equipment, such as bearings, gears, chains and other parts.

- Select the right lubricating oil or grease to ensure that its quality meets the requirements of the equipment to reduce wear and extend the life of the equipment.

3. Tool maintenance

- Check the wear of the tool regularly. If the tool is found to be seriously worn, it should be replaced in time.

- Maintain the sharpness of the tool, and can be sharpened regularly or replaced with new tools to improve cutting efficiency and quality.

- When installing and removing tools, care should be taken to avoid damaging tools and equipment.

4. Electrical system maintenance

- Regularly check whether the wiring of the electrical equipment is loose and the contact is good. If there is a problem, it should be dealt with in time.

- Check the insulation performance of electrical equipment to ensure its safety and reliability.

- When cleaning electrical equipment, avoid direct cleaning with wet cloth or water to avoid electrical failure.

5. Check regularly

- Regular inspection of sponge machinery, including mechanical structure, electrical system, hydraulic system, etc., timely detection and elimination of potential faults.

- Check whether all parts of the equipment are operating normally. If there is abnormal sound, vibration or heat, stop the machine immediately for inspection.