What is the composition structure of the sponge cutting machine? Sponge cutting machine is mainly through the electric wire to complete the foam cutting, so what parts is it composed of? Mainly includes the mechanical part, the electrical part and the software programming part, the following is a simple introduction.

1, the mechanical part consists of: body, two X axis slide, two Y axis slide. The X and Y slides are the core of the entire device. Rely on the linkage action of two axes to complete the cutting of different workpieces. It is mainly composed of control motor, lead screw, support and slide rail. Its operating principle is that the motor drives the screw to rotate through the coupling because the nut receives the restriction of rotation so that the rotating motion becomes a linear motion, and each control shaft is equipped with an overstroke switch to ensure that crashes are avoided.

2. Introduction to the electrical part: The electrical part mainly accepts the instructions of the computer and amplifies the signal to drive the motor to rotate. It mainly consists of the following parts:

1) The control board, which is the driver that directly receives the instructions issued by the computer and sends them into pulse signals and direction signals to each axis;

2) The driver, which receives the pulse signal and direction signal sent by the control board and amplifies the signal to drive the motor to rotate;

3) The motor, the amplified electrical signal into mechanical rotation 4) the power supply, the voltage stability, filtering to make the electrical appliance get a good working state.

3, software programming part: Based on ACD widely used system platform, the operation is simple and practical, as long as there is a general two-dimensional drawing basis, soon learn to operate on the computer, four steps in place. A, CAD drawing points, B save documents, C control software to import documents to adjust parameters, D debug cutting.

Through the division of labor and cooperation of these parts, the CNC sponge cutting machine can effectively complete the cutting work, because it involves the software programming part, so the personnel need to be trained before the operation. At the same time, safe production is important, safe operating procedures and product instructions should be carefully read.